![](/images/new-backgrounds/1302430/30243071x1.webp)
3.5.2Setting Up the Count Up Timer
1.Press FUNC to access the Functions. Turn the LARGE knob to select the Timer (TMR) function. Turn the SMALL knob to
select the Count Up Timer function. Now, press the ENT key.
Select Count Up Timer
Figure 3-32 Select the Count Up Timer Function
2.Press the ENT key to Start or Stop the timer. Press the CLR key to reset the timer to 0:00.
The Default (Starting) Value
| Start |
|
|
Press ENT to | Press CLR to Reset the Timer | ||
or Stop the Timer |
| to 0:00 |
Figure 3-33 Selecting the Count Up Timer
3.5.3Viewing Timers in the Com Display
When a timer is active, the timer value will be shown in the lower right corner of the Com display. While both timers may be actively counting at the same time, the Count Down Timer will have precedence in being shown. If the Count Down Timer is paused, the Count Up Timer will then be shown until the Count Down Timer is restarted.
Timer Value
Figure 3-34 Timer Value Shown in the Com Display
1. Pressing CLR and then ENT will reset the displayed Timer.
Figure 3-35 Stop or Clear the Timer in the Com Display
2. Pressing ENT twice will stop the displayed Timer.
Garmin GTR 225/225A/225B Pilot’s Guide |