Garmin 225A, 225B manual Recent Com Frequencies, Press the Func key to access the Functions

1. Press the FUNC key to access the Functions.

2.Turn the LARGE knob to select the COM, ICS, or SYS functions.

3.Turn the SMALL knob to view the choices in each function.

4. Press the ENT key to access the function.

5. Press the FUNC key again to exit Functions.

3.2Com Frequencies

The Com Frequencies category in the Functions section contains recently used frequencies (Recent), user-defined frequencies (User), and a database of all frequencies provided in the standard default memory (Database).

3.2.1Recent Com Frequencies

The last 20 Com frequencies used are kept in the list of Recent Com Frequencies and can be accessed in this function.

NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz- specific user frequencies will be deleted from the user frequency list. This only affects the user frequencies within the 8.33 kHz spectrum.

1.Press FUNC to access the Functions. Turn the LARGE knob to select the Com Function. Turn the SMALL knob to view the

Recent frequency function. Then, press ENT.

2. Turn the SMALL knob to select an Entry (1-20).

Turn SMALL Knob To Select Entry

Selected Frequency

Press ENT to Make the Selected

Press <-> To Make the Frequency the Standby Selected Frequency The

Active Frequency

Figure 3-2 Recent Com Frequencies

3.Press and release the FLIP/FLOP key to transfer the displayed channel to the Active frequency position. Press the ENT key to transfer the displayed channel to the Standby frequency position.

3-2 Garmin GTR 225/225A/225B Pilot’s Guide 190-01182-00 Rev. A