Updating the Frequency Database | Garmin 225A, 225B instruction

4.2Updating the Frequency Database

The GTR 225 uses a standard USB memory device to load the frequency database into the GTR 225. The memory device is not provided by Garmin. The Frequency database is stored internally and the USB memory device is only used to transfer the database into the unit.

The Garmin databases can be updated by following the instructions on https://fly.garmin.com/fly-garmin.

The following equipment is required to perform the update:

•Windows-compatible PC computer (Windows 2000, XP, Vista, or Windows

7 recommended)

•USB 2.0 compatible USB flash drive

•External USB cable

•Updated database obtained from the Garmin web site

NOTE: The data contained in the frequency database comes from government agencies. Garmin accurately processes and cross-validates the data, but cannot guarantee the accuracy and completeness of the data.

4.2.1Downloading the Frequency Database

The Frequency database is updated on a 28-day cycle. Frequency database updates are provided by Garmin and may be downloaded from the Garmin web site https://fly.garmin.com/fly-garmin.

4.2.2Updating the GTR 225 Frequency Database

See Section 3.4.5 for details on updating the database.

190-01182-00 Rev. A

Garmin GTR 225/225A/225B Pilot’s Guide

4-3

Image 41

Garmin 225A, 225B manual Updating the Frequency Database

Contents

GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation US Toll Free Canada Toll Free Product Registration and Support Contents Index Index-1 Photo Sensor Product Description Pilot Controls Power/Com Volume/Squelch Knob FLIP/FLOP Key Tuning LARGE/SMALL Concentric Cursor KnobsCom Key MEM Key MON Monitor Key USB PortFunc Function Key Com Radio Power OnSelecting a Com Frequency Selected Frequency Saving a Com Channel Monitoring the Standby Com ChannelAfter selecting the desired characters, press ENT Monitor Annunciation Standby Frequency Being Monitored Selected Wpt Type After making a selection, press ENT Active and Standby frequencies Com Database Look-UpEmergency Channel Frequency Database Reverse Look-Up Stuck MicRemote Frequency Selection Control Airport Identifier Shown For Freqs In Database This page intentionally left blank Functions Description SYS Config Com Spacing Recent Com Frequencies Press the Func key to access the FunctionsCom Frequencies Press the CLR key to delete this User frequency Com User FrequenciesSelected Frequency Select Wpt Name Select Wpt Type Press ENT Key To Delete Selected Freq Select User Freqs Frequencies. Press ENTSelect User Freq Value Select User Wpt Name Press ENT Key To Set Selected Freq As Standby Com Database FrequenciesIdentifier Selected Freq As Active Com Nearest Area Control Center ACC Frequencies Com Nearest Airports APTTurn the Small knob to display the available ACCs Turn Small Knob To Scroll Through Available Airports 13 Com Nearest FSS Frequencies Com Nearest Flight Service Station FSS Frequencies 14 Com Nearest Weather Frequencies Com Nearest Weather WX Frequencies Adjust Intercom ICS Configuration Turn the Small knob to turn the Aux Audio On or Off Aux Audio Speaker On/Off Intercom On/OffIntercom On/Off function. Then, press the ENT key Speaker On/Off function. Then, press ENT Turn the Small Knob to Select the Channel Spacing System ConfigurationCom Spacing Select the Offset Value Display BrightnessBrightness Database Info Display ContrastDisplay Contrast function. Then, press the ENT key Database Version function. Then, press the ENT key USB Port USB Cable USB Memory Device Load DatabaseLoad Database function. Then, press the ENT key Serial Number Software VersionPress the Func key to return to the main menu Serial Number function. Then, press ENT Setting Up the Count Down Timer Timers Viewing Timers in the Com Display Setting Up the Count Up TimerPressing CLR and then ENT will reset the displayed Timer Pressing ENT twice will stop the displayed Timer 36 Count Down Timer Value Now Counting Up Count Down Timer Value Highlighted When Counting Up This page intentionally left blank Appendix Troubleshooting Or disabled via a Remote mounted It can be enabledIf in Lock Out mode Check Mic key input Updating the Frequency Database Messages Switch has been Power has been Re-apply power to the unitAll installations Radio will no longer Transmit This input will now Installations Index Stuck mic 2-5 Support