Com Nearest Flight Service Station FSS Frequencies | Garmin 225

3.Press the ENT key to insert the highlighted frequency as the Standby frequency. Or, press the CLR key to return to the

Functions display.

4.Press and release the FLIP/FLOP key to set the selected frequency as the Active frequency.

3.2.6Com Nearest Flight Service Station (FSS) Frequencies

The GTR 225, when interfaced with an appropriate GPS receiver, will report the 25 nearest Flight Service Station (FSS) frequencies.

Turn SMALL Knob

To Scroll Through

Available Frequencies

Figure 3-13 Com Nearest FSS Frequencies

1.Press FUNC to access the Functions. With the Com Frequency Function highlighted, turn the SMALL knob to view the Com

Nearest FSS function. Then, press ENT.

2.Turn the SMALL knob to display the available FSS frequencies.

3.Press the ENT key to insert the highlighted frequency as the Standby frequency. Or, press the CLR key to return to the

Functions display.

4.Press and release the FLIP/FLOP key to set the selected frequency as the Active frequency.

190-01182-00 Rev. A

Garmin GTR 225/225A/225B Pilot’s Guide

3-7

Image 25

Garmin 225B, 225A manual Com Nearest Flight Service Station FSS Frequencies, Com Nearest FSS Frequencies

Contents

GTR 225/225A/225B November Limited Warranty Garmin GTR 225/225A/225B Pilot’s Guide Operation US Toll Free Canada Toll Free Product Registration and Support Contents Index Index-1 Photo Sensor Product Description Pilot Controls Power/Com Volume/Squelch Knob FLIP/FLOP Key Tuning LARGE/SMALL Concentric Cursor KnobsCom Key MEM Key Func Function Key USB PortMON Monitor Key Com Radio Power OnSelecting a Com Frequency Selected Frequency Saving a Com Channel Monitoring the Standby Com ChannelAfter selecting the desired characters, press ENT Monitor Annunciation Standby Frequency Being Monitored Selected Wpt Type After making a selection, press ENT Emergency Channel Com Database Look-UpActive and Standby frequencies Frequency Database Reverse Look-Up Stuck MicRemote Frequency Selection Control Airport Identifier Shown For Freqs In Database This page intentionally left blank Functions Description SYS Config Com Spacing Com Frequencies Press the Func key to access the FunctionsRecent Com Frequencies Press the CLR key to delete this User frequency Com User FrequenciesSelected Frequency Select Wpt Name Select Wpt Type Press ENT Key To Delete Selected Freq Select User Freqs Frequencies. Press ENTSelect User Freq Value Select User Wpt Name Press ENT Key To Set Selected Freq As Standby Com Database FrequenciesIdentifier Selected Freq As Active Com Nearest Area Control Center ACC Frequencies Com Nearest Airports APTTurn the Small knob to display the available ACCs Turn Small Knob To Scroll Through Available Airports 13 Com Nearest FSS Frequencies Com Nearest Flight Service Station FSS Frequencies 14 Com Nearest Weather Frequencies Com Nearest Weather WX Frequencies Adjust Intercom ICS Configuration Turn the Small knob to turn the Aux Audio On or Off Aux Audio Speaker On/Off Intercom On/OffIntercom On/Off function. Then, press the ENT key Speaker On/Off function. Then, press ENT Com Spacing System ConfigurationTurn the Small Knob to Select the Channel Spacing Brightness Display BrightnessSelect the Offset Value Database Info Display ContrastDisplay Contrast function. Then, press the ENT key Database Version function. Then, press the ENT key Load Database function. Then, press the ENT key Load DatabaseUSB Port USB Cable USB Memory Device Serial Number Software VersionPress the Func key to return to the main menu Serial Number function. Then, press ENT Setting Up the Count Down Timer Timers Viewing Timers in the Com Display Setting Up the Count Up TimerPressing CLR and then ENT will reset the displayed Timer Pressing ENT twice will stop the displayed Timer 36 Count Down Timer Value Now Counting Up Count Down Timer Value Highlighted When Counting Up This page intentionally left blank Appendix Troubleshooting Or disabled via a Remote mounted It can be enabledIf in Lock Out mode Check Mic key input Updating the Frequency Database Messages Switch has been Power has been Re-apply power to the unitAll installations Radio will no longer Transmit This input will now Installations Index Stuck mic 2-5 Support