2.0SAFETY
Read all instructions carefully before installing or operating the equipment.
2.1General safety
The procedure described in these instructions is intended for use by persons experienced in the operation of Uninterruptible Power Systems and ancillary equipment.
Persons unfamiliar with this type of equipment should seek guidance from experienced personnel.
The EDP70 PLUS UPS is designed to be operated in accordance with existing safe operating procedures. These instructions are not intended to replace existing safety practices.
If there are any questions regarding the safe operation of the system, contact a Chloride service representative.
This equipment is designed and built for safe operation when used to supply its rated load, providing it is installed as specified by qualified, licensed and competent electricians.
Electrical energy can be supplied by the equipment and the battery.
2.2Symbols
The following symbols appear in this book and in the unit:
Hazardous voltages are present. If the instructions are not heeded, there is a risk of electrical shock and danger to personal safety.
DIRECT CURRENT SUPPLY
ALTERNATING CURRENT SUPPLY
ON position of the switches |
|
|
OFF position of the switches |
|
|
Inverter Start Up | For | explanation see Para. 6.2. of this manual |
Inverter Shutdown | For | explanation see Para. 6.2. of this manual |
Audible Alarm Cancel Switch | For | explanation see Para. 6.2. of this manual |
page 14
