Garmin EDP70 manual Btu/H

4.2Installation

Check the rating label on the rear of the front panel of the EDP70 PLUS UPS to ensure the input/output voltages, frequency and load are all within the rating of the UPS.

EDP70 PLUS is designed to operate in an office environment with an optimum temperature of 68°F [20 C]. A gap of at least 4 in [ 10cm. ] must be maintained at rear of the UPS to ensure adequate ventilation. Nothing should be placed around the equipment which might restrict the airflow.

Ensure the interconnecting cables do not cause a hazard to the user.

A gap of at least 32 in [ 812 mm] must be maintained above the UPS to ensure adequate space for maintenance. The appropriate lifting equipment must be used to move the EDP70 PLUS UPS.

Figure 16 – UPS Ratings

				UPS ratings
Description	U.M.	24	24	24		36	36	36
		12kVA	18kVA	24kVA		24kVA	30kVA	36kVA
Output power	kVA	12	18	24		24	30	36
Nominal Load	kW	8	12	16		16	20	24
Maximum input power (with
unit @ nominal Load & battery	kVA	15	21	28		28	35	42
recharge)
Maximum dissipation (with	BTU/H	3750	5460	6800		7700	9500	11300
inverter @ nominal Load)
Number of battery cells	n		144				240
Battery voltage range	V		238-327				396-545
Battery	A	37	55	74		53	67	80
end-discharge current
				UPS ratings
Description	U.M.	50	50	50		80	80	80
		30kVA	40kVA	50kVA		50kVA	65kVA	80kVA
Output power	kVA	30	40	50		50	65	80
Nominal Load	kW	24	32	40		40	52	64
Maximum input power (with
unit @ nominal Load & battery	kVA	43	57	71		71	91	112
recharge)
Maximum dissipation (with	BTU/H	9300	11700	14300		14300	18600	22100
inverter @ nominal Load)
Number of battery cells	n				240
Battery voltage range	V			396-545
Battery	A	67	88	110		105	140	173
end-discharge current

page 26 --MI00/10056 rev. 8 —05/2006