System5 Components

Adding or replacing memory

The Synchronous Dynamic Random Access Memory (SDRAM) Dual Inline Memory Modules (DIMMs) supported by your system board conform to the following standards:

￿16 MB, 32 MB, 64 MB, 128 MB, and 256 MB

￿Non-ECC (64-bit) memory

￿Single- or double-sided configurations

￿512 MB maximum system memory

The system board contains two DIMM sockets. You can fill the sockets with 16-MB, 32-MB, 64-MB, 128-MB, or 256-MB DIMMs in any combination to expand the SDRAM up to 512 MB.

If your processor has a 66-MHz front side bus (FSB), you can use 66-MHz or 100-MHz SDRAM. If your processor has a 100-MHz FSB, you should use only 100-MHz SDRAM.

No jumper settings are required for the memory size or type because the BIOS automatically detects this information.

Adding or replacing memory

45