
Replacing the AGP card
Observe the following instructions for replacing the Accelerated Graphics Port (AGP) card.
To replace the AGP card:
1Turn off the computer, disconnect the power cord, modem cord (if installed), and all external peripheral devices.
2Remove the right panel. (See “Removing the side panels” on page 19 and observe the “Static electricity precautions” on page 17.)
3Using a Phillips screwdriver, remove the screw that secures the AGP card to the rear panel, then pull out the card.
AGP card
4Install the new AGP card, making sure the card is firmly seated on the system board, then secure the AGP card to the rear panel with the screw.
5Reconnect the monitor cable, then turn on the system and all peripheral devices.
Replacing the AGP card | 51 |