cLift the heat sink at an angle and unhook the clip from the other tab. Lift the heat sink off the processor.
4Remove the processor:
aOpen the locking lever on the processor socket by moving the lever slightly out to the side and then lifting it up 90 degrees.
Processor
Pin 1
Locking lever
bLift the old processor straight up and out of the socket.
5Install the new processor:
aHold the new processor over the empty processor socket and verify that pin 1 on both the processor and the socket are aligned. Pin 1 is near the cut out corner.
bGently place the new processor into the socket.
cSecure the processor by lowering the locking lever until the lever latches into place. The processor will slip into place without pressure when aligned correctly.
62System Components