Chapter 4: Advanced Features and Configuration
3 In the E-Mail Reports section, you can elect to have any or all logs e-mailed to a designated recipient at the time specified. Place a check next to the log you want sent, then specify when it will be sent.
4 In the E-Mail Address section, type the e-mail address of the person you want to receive the e-mailed logs. Also enter the subject of the e-mail and specify the outgoing mail (SMTP) server and port from which the e-mail will be sent.
5 Click Save to save your entries or Cancel to remove your entries. Close the window to return to the Advanced Features/Configuration window.
Set the MAC address
A MAC address is a unique, 12-digit code assigned to networking hardware for identification purposes. Some ISPs require that you provide them with the MAC address of the network interface card that was connected to their DSL or Cable modem during installation. The MAC Address window lets you set the MAC address used on the WAN port connection of your router.
To set the MAC address:
1 Click MAC Address in the Advanced Configuration section. The MAC Address window opens.
2 Type the MAC address of the computer that was initially connect to the DSL or cable modem (the address required by your ISP) in the MAC Address box.
- OR -
