CHAPTER 3: Using Your Monitor

Starting the monitor

Caution

If you plan to connect your monitor’s USB hub to the computer’s USB port, first install the included EzTune software onto your computer.

Turning on the monitor

To start the monitor:

1Touch the power button on the front of monitor. The power LED on the power button changes from purple (off) to blue (on), then turns amber/orange (standby) if no video source is detected.

Tip

For more information on using your monitor’s touch buttons, see “Using the EzTouch menu” on page 29.

Power button

2Turn on your computer. After your computer is running, the power LED on the monitor’s power button should be blue, indicating that the monitor has detected a video source. Allow about 15 seconds for the display image to appear.

If you do not see an image after waiting 15 seconds, check the color of the power button light.

•No light—The monitor is not receiving power. Make sure that the monitor is plugged into an AC outlet.

•Purple—The monitor is turned off. Press the power button to turn it on.

28