www.gateway.com

To use headphones:

Plug headphones into either of the speaker bar’s headphone jacks. The speaker bar’s volume is muted, and sound is played through the connected headphones. You can connect headphones to both headphone jacks, and sound plays out of both sets of headphones.

Power management

Whenever no video signal is detected by your monitor, it enters Standby mode, a mode that uses very little power. When in Standby mode, the power button turns orange. Turning off your computer stops its video signal to the monitor, so if your computer is the only video source connected, your monitor enters Standby.

If the monitor does not enter Standby, and instead displays a prompt for the product tour, you should disable the product tour.

To disable the product tour and enable Standby mode:

1Touch (Menu), (Main Menu), then touch

(Advanced).

2Touch one of the (Adjust) buttons to select

Integrated Product Tour, then press (Select) to disable the tour.

Energy declaration

When connected to a computer that supports the VESA Display Power Management Signaling (DPMS) Protocol, the monitor can conserve significant energy by reducing power consumption during periods of non-use. When your computer goes into the energy saving mode, the monitor will then enter the Active Off mode (sleep). In the Active Off mode the Power LED will still show orange.

Use these conventions and the power can be reduced to the following levels:

VESA State

LED Indicator

Power Consumption

 

 

 

On

Blue

168 W

 

 

 

Standby

Amber

19 W

 

 

 

Off

Purple

19 W

 

 

 

41