www.gateway.com

•Amber—The monitor is not detecting a video source. Check the video input connections and make sure that the computer is turned on and connected correctly to the monitor.

•Blue—The monitor is detecting a video source.

For more troubleshooting information, see “Troubleshooting” on page 43.

Tip

The first prompt you see is the language selection menu settings. You must select a default language for the OSD before you can proceed. To modify the language you select at a future time, use the Advanced menu. If you cannot access the Advanced menu because you chose a language you cannot read, do the following:

•Unplug the monitor from the power outlet for ten or more seconds.

•Plug the monitor back into the power outlet.

You will be prompted for the language selection menu settings again.

Important

If you turn on the monitor and no video inputs are connected, the product tour starts. To disable the product tour, see “Power management” on page 41.

3Adjust the tilt of the monitor for the best viewing angle.

4For VGA input only: After you see the Windows desktop, touch (Menu) on the front of your monitor, then touch (Auto) to automatically adjust your display image to the ideal settings.

5Use the on-screen display (OSD) to adjust other monitor settings. For more information, see “Using the EzTouch menu” on page 29.

Using the EzTouch menu

This monitor features an on-screen display (OSD) and EzTouch menu buttons that let you adjust settings. Your monitor saves the settings, even if you turn off the monitor. Your monitor has two levels of menus, and the functionality of the touch buttons depends on the menu that is currently open:

•The shortcut menu (the first menu that appears) lets you quickly change some of the most commonly accessed settings.

•The main menu lets you access all of the functions of the display and precisely adjust all levels of settings.

29