CHAPTER 5: Using the Universal Remote Control

Programming the universal remote control

You can program the remote control directly (by entering a five-digit code) or by browsing codes.

To directly program the remote control with a code:

1Press and hold the mode button (CBL/SAT, DVD, LCD, or MEDIA CENTER) for the device you want to program for about four seconds. The LED flashes twice, indicating that the button is ready to be programmed.

2Press the five-digit code for the device. After the code is entered, the LED flashes twice, indicating that programming is complete.

If an invalid key or code is entered, or if ten seconds passes without a button press, programming mode ends and the previous values are restored. The LED lights for about a half second, then turns off.

To program the remote control by browsing through the most common codes:

1Press and hold the mode button (CBL/SAT, DVD, LCD, or MEDIA CENTER) for the device you want to program for about four seconds. The LED flashes twice, indicating that the button is ready to be programmed.

2Press 991, then press the digit that corresponds to the type of device you want to associate with that mode’s button:

Device type

Digit

 

 

LCD

0

 

 

DVD

1

 

 

CBL/SAT

2

 

 

Media Center

3

 

 

Tuner

4

 

 

The remote is temporarily programmed with the first most common code for the selected device type.

54