GE BC5002, IC5002, BC5005, IC5005 Installation Procedures, Critical Dimensions for Installation

3

Installation Procedures

1.Make a cut-out (corresponding to size of the particular unit) in the switchgear panels or cabinet doors (see Figures 3-1 through 3-3).

2.Insert the unit into this cut-out from the front.

3.Insert the mounting screws together with mounting blocks in the slots provided in the metal cover and tighten all screws evenly until the surround panel covers the cut-out securely. Maximum torque is 0.25 N-m (2.2 lbf-in).

Caution

Over tightening the screws will cause irreparable damage to the front panel and break the touch screen itself.

Connect the provided power cord to the AC power supply. If additional grounding to a grounding screw is desired, use 14 AWG gauge wire minimum.

Table 3-1. Critical Dimensions for Installation

Dimension	IC5002	IC5005	IC5008
	BC5002	BC5005	BC5008
Cover (W x H)	313 x 252mm	373.6 x 295.6 mm	426 x 355mm
	23.3 x 9.9 in.	14.7 x 11.6 in.	16.8 x 14.0 in.
Cutout (recess) (W x	318 x 256mm +1.0mm	376 x 299mm +1.0mm	428 x 358mm +1.0mm
H)	12.5 x 10.1 in. + 0.04	14.8 x 11.8 in. + 0.04	16.9 x 14.0 in. + 0.04
	in.	in.	in.
Space required for	Minimum 50mm (2 in) clearance at top and bottom of the unit. Minimum
ventilation	30mm (1.2 in.) at sides.
	Note additional side space consideration is required for models with CD-
	ROM, depending on cabinet design. Viewed from the front, there must be
	sufficient space (132 mm or 5.20 in. minimum) to the left of the units to
	allow the CD-ROM drive drawer to open.
Mounting depth	177mm	150mm	154mm
	6.97 in.	5.9 in.	6.1 in.

3-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C