GE IC5005, IC5002, BC5005, IC5008, BC5008, BC5002 user manual Control Keys

Chapter

6

Controls

Control Keys

Intelligence Panel PCs are shipped with the Windows NT or Windows 2000 operating system installed. Additional pre-installed software includes drivers to support the virtual keyboard. In case you need to re-install the software, CDs and floppy disks are included with the appropriate drivers.

The five keys on the front panel are assigned the following default functions.

Opens and closes the virtual keyboard to allow character input via the

TouchScreen

With SHIFT key: No function.

Switches tasks (ALT+ESC) in Windows. With SHIFT key: No function.

Hot Keys: Launches application - Starts the text editor (Notepad) as the default.

With SHIFT key: Increases display brightness.

Right mouse key function.

With SHIFT key: Decreases display brightness.

SHIFT key for upper case. The SHIFT key must be pressed at the same time as the desired function key.

The general system keys can be disabled or configured to launch an application or tool through an .ini file. For information on application instructions, see the GE Fanuc web site http://gefanuc.com/.

Note: If the Softkeyboard is not installed, only the display setting functions are active.

Note: You can alter the default settings of the virtual keyboard. Information on altering the settings can be found in the README file on the floppy disk.

GFK-2023C 6-1