PROBLEM SOLVER(continued)
—
PROBLEM
OVEN LIGHT DOES
NOT COME ON
OVEN WILL NOT
SELF-CLEAN
DOOR WON’T OPEN AFTER
SELF-CLEAN CYCLE
VENT SYSTEM BLOWER
DOES NOT WORK
OVEN TEMPERATURE
TOO HOT OR TOO COLD
POSSIBLE CAUSE
●
Bulb may be loose or burned out, especially if the oven control/clock is working.
●
STOP TIME must be between 2 and 4 hours later than START ‘TIME.
●
Oven temperature is too high to set self-clean operation. Allow the oven to cool to
room temperature and reset the controls.
●
If the self-cleaning mode malfunctions, turn off and disconnect power supply.
Have the range serviced by a qualified technician.
●
If “F-” and a number flash on
the
display, and the control beeps, this indicates a
function error code. Press the CANCEL button. Allow the oven to cool for
lhour.
Put oven back into operation. If function error code repeats, disconnect power to
the range. Call for service.
● When the temperature has fallen below the safe locking temperature the door
can be opened.
● The circuit breaker in your house has been tripped, or a fuse has been blown.
● If the modules operate but the blower doesn’t, the fault may be in the blower
control switch or blower wiring connections. Be sure to disconnect power to
the range at the household distribution panel before attempting to service the
blower yourself.
● The oven thermostat needs adjustment. See the Adjusting the Oven
Thermostat section.
—
If you need more help.. call, toll free:
GE Answer Center”
800.626.2000
consumer information service
44