ge.com
Stainless Steel Surfaces (on some models)
Safety
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.
To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our
National Parts Center | 1.800.626.2002 |
ge.com
Instructions Operating
Control Panel
If desired, the touch pads may be turned off before cleaning.
See the Range
Clean up splatters with a damp cloth.
You may also use a glass cleaner.
Remove heavier soil with warm soapy water. Do not use abrasives of any kind.
Turn on the touch pads after cleaning.
Instructions
Oven Heating Element
Do not clean the broil element. Any soil will burn off when the element is heated.
Removable Oven Floor
Care and
Press down and pull out.
To remove the oven floor for easier cleaning:
Remove the oven door using the instructions in the
Press down and pull out the removable oven floor.
Clean the oven floor with warm soapy water.
When reinstalling the oven floor, be sure to slide it all the way to the back of the oven.
IMPORTANT: Always replace the removable floor before the next use.
Cleaning Troubleshooting
Storage Drawer Removal
To remove the drawer: | To replace the drawer: |
Rail | Stop guide |
Pull the drawer out until it stops.
Lift the front of the drawer until the stops clear the guides.
Remove the drawer.
Place the drawer rails on the guides.
Push the drawer back until it stops.
Lift the front of the drawer and push back until the stops clear the guides.
Lower the front of the drawer and push back until it closes.
Tips Consumer Support
33
