Safety Information
Operating Instructions
Troubleshooting Tips
Customer Service
About the water softening system.
Set Present Time of Day
NOTE: If the words PRESENT TIME do not show in the display, press the SET button until they do.
| Press the UP or DOWN button to set. The UP button | ||||
1 | |||||
| moves the display ahead; the DOWN button moves the time | ||||
| backward. If the present time is between noon and midnight, | ||||
| be sure PM shows |
| . If the present time is between | ||
|
|
| AM shows |
| . |
| midnight and noon, be sure |
| |||
NOTES: Each press of an UP or DOWN button changes the time by one minute. Holding the button in changes the time 32 minutes each second.
2 When the present time shows in display, press SET to apply.
Set Water Hardness Number
NOTE: If HARDNESS does not show in the display, press SET button until it does.
| Press the UP or DOWN button to set your water hardness |
1 | |
| number in the display. The DOWN button moves the display |
down to 1. The UP button moves the display up to 110.
NOTE: Each press of an UP or DOWN button changes the display by 1 between 1 and 25. Above 25, the display changes 5 at a time…25, 30, 35, etc. Holding a button in changes the numbers twice each second.
2 When the water hardness number shows, press SET to apply. You can get the grains per gallon (gpg) hardness of your water supply from a water analysis laboratory, or call and ask your local water department, if you are on a municipal supply.
10
