Operator's Manual | Fourth Edition · First Printing |
|
|
|
|
Work Area Safety
Fall Hazards | Collision Hazards |
Occupants must wear a safety belt or harness in accordance with governmental regulations. Attach the lanyard to the anchor provided in the platform.
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Lower the platform entry
Do not enter or exit the platform unless the machine is in the stowed position and the platform is at ground level.
Be aware of limited sight distance and blind spots when driving or operating.
Be aware of the boom position and tailswing when rotating the turntable.
Check the work area for overhead obstructions or other possible hazards.
Be aware of crushing hazards when grasping the platform guard rail.
Operators must comply with employer, job site and governmental rules regarding the use of personal protective equipment.
Observe and use the
16 | Part No.114339 |