Genie Z-45, Z-25J manual Inspections Pre-operationInspection

Operator's Manual Fourth Edition · First Printing

Inspections

Pre-operation Inspection

!Be sure that the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located in the platform.

!Be sure that all decals are legible and in place. See Decals section.

!Check for engine oil leaks and proper oil level. Add oil if needed. See Maintenance section.

!Check for hydraulic oil leaks and proper oil level. Add oil if needed. See Maintenance section.

!Check for engine coolant leaks and proper level of coolant. Add coolant if needed. See Maintenance section.

!Check for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.

!Z-45/25 RT and Z-45/25J RT models with air- filled tires: Check for proper tire pressure. Add air if needed. See Maintenance section.

Check the following components or areas for damage, improperly installed or missing parts and unauthorized modifications:

!Electrical components, wiring and electrical cables

!Hydraulic hoses, fittings, cylinders and manifolds

!Fuel and hydraulic tanks

!Drive and turntable motors and drive hubs

!Boom wear pads

!Tires and wheels

!Engine and related components

!Limit switches and horn

!Alarms and beacons (if equipped)

!Nuts, bolts and other fasteners

!Platform entry mid-rail or gate Check entire machine for:

!Cracks in welds or structural components

!Dents or damage to machine

!Excessive rust, corrosion or oxidation

!Be sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened.

!After you complete your inspection, be sure that all compartment covers are in place and latched.

28 Z-45/25 • Z-45/25J Part No.114339