Genie Z-45, Z-25 manual Y Axis, X Axis, Transport and Lifting Instructions, Observe and Obey

Operator's Manual Fourth Edition · First Printing

Transport and Lifting Instructions

Observe and Obey:

Only qualified riggers should rig and lift the machine.

Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight. See the serial label for the machine weight.

Lifting Instructions

Fully lower and retract the boom. Fully lower the jib (if equipped). Remove all loose items on the machine.

Determine the center of gravity of your machine using the table and the picture on this page.

Attach the rigging only to the designated lifting points on the machine. There are four lifting points on the chassis.

Adjust the rigging to prevent damage to the machine and to keep the machine level.

	X Axis		Y Axis
Z-45/25	47	in	42	in
	1.19 m		1.06 m
Z-45/25J	49	in	44.5	in
	1.24 m		1.13 m

Y Axis

X Axis

48 Z-45/25 • Z-45/25J Part No.114339