Manuals / Genie / Lawn and Garden / Utility Vehicle

Genie Z-45, Z-25J At the Platform Controls, Test the Horn, Test the Foot Switch, Inspections

Models: Z-45, Z-25J Z-45, Z-25

1 59

Download 59 pages 37.07 Kb

Page 33

At the Platform Controls

Fourth Edition · First Printing	Operator's Manual

At the Platform Controls

Test Emergency Stop

15 Turn the key switch to platform control and restart the engine.

16Push in the platform red Emergency Stop button to the off position.

Result: The engine will shut off after 2 or 3 seconds.

17Pull out the red Emergency Stop button and restart the engine.

Test the Horn

18 Push the horn button.

Result: The horn should sound.

Test the Foot Switch

19Push in the platform red Emergency Stop button to the off position.

20Pull out the red Emergency Stop button to the on position but do not start the engine.

21Press down the foot switch and attempt to start the engine by moving the start toggle switch to either side.

Result: The engine should not start.

22Do not press down the foot switch and restart the engine.

Result: The engine should start.

23 Do not press down the foot switch and test each machine function.

Result: The machine functions should not operate.

Inspections

Test Machine Functions

24 Press down the foot switch.

25Activate each machine function control handle or toggle switch.

Result: All boom/platform functions should operate through a full cycle.

Test the Steering

26 Press down the foot switch.

27 Press the thumb rocker switch on top of the drive control handle in the direction indicated by the blue triangle on the control panel OR slowly move the control handle in the direction indicated by the blue triangle.

Result: The steer wheels should turn in the direction that the blue triangles point on the drive chassis.

28 Press the thumb rocker switch on top of the drive control handle in the direction indicated by the yellow triangle on the control panel OR slowly move the control handle in the direction indicated by the yellow triangle.

Result: The steer wheels should turn in the direction that the yellow triangles point on the drive chassis.

Part No.114339

Z-45/25 • Z-45/25J

31

Image 33

Genie Z-45, Z-25J At the Platform Controls, Test the Horn, Test the Foot Switch, Test Machine Functions, Test the Steering

Contents

Australia with Maintenance Information IC PowerOperator’s Manual Z-4525 Z-4525JContact us ContentsIntroduction Danger Owners, Users and OperatorsDo Not Operate Unless 1 Avoid hazardous situationsSafety Sign Maintenance Introduction Hazard ClassificationIntended Use Symbol and Hazard Pictorials Definitions Operators Manual Symbol and Hazard Pictorials DefinitionsSafety signs and locations General SafetySafety signs and locations General SafetyOperators Manual Fourth Edition · First PrintingSafety signs and locations General SafetyFourth Edition · First Printing Operators ManualSafety signs and locations General SafetyOperators Manual Fourth Edition · First PrintingSafety signs and locations General SafetyFourth Edition · First Printing Operators ManualSafety signs and locations General SafetyOperators Manual Fourth Edition · First PrintingPersonal Safety Fall Protection Tip-overHazards Work Area Safety Electrocution HazardsWork Area Safety Operators Manual Work Area SafetyWork Area Safety Operation on Slopes Hazards Fall Hazards Collision HazardsWork Area Safety Bodily Injury Hazard Work Area Safety Explosion and Fire HazardsDamaged Machine Hazards Component Damage HazardsExplosion Hazard Work Area Safety Battery Safety Burn HazardsElectrocution Hazard Lockout After Each UseLegend Platform Control Panel ControlsFourth Edition · First Printing ControlsControls Operators ManualPlatform Control Panel Fourth Edition · First Printing ControlsControls Ground Control PanelControls Fourth Edition · First PrintingGround Control Panel Operators Manual ControlsInspections Pre-operationInspection Fundamentals 2Always perform a pre-operationinspectionDo Not Operate Unless Inspections Pre-operationInspection Inspections Function Test Fundamentals 3Always perform function tests prior to useDo Not Operate Unless At the Ground Controls InspectionsTest Emergency Stop Test the Machine FunctionsAt the Platform Controls Test the Foot SwitchTest the Horn Test Machine FunctionsTest the Drive Enable System Test Drive and BrakingInspections Test Limited Drive Speed - Standard Base Models Test Limited Drive Speed - Narrow Base ModelsInspections Test Aircraft Protection Package if equipped Test the Lift/Drive Select Function if equippedInspections Test Auxiliary ControlsInspections Workplace Inspection Fundamentals4Inspect the workplace Do Not Operate UnlessPart No Inspections Inspection for Decals with WordsDecal Description QuantityChassis Platform Engine Side Inspections Ground Controls Side DriveFourth Edition · First Printing Operators ManualPart No Inspections Inspection for Decals with SymbolsDecal Description QuantityChassis Platform Engine Side Inspections Ground Controls Side DriveFourth Edition · First Printing Operators ManualOperating Instructions Do Not Operate Unless 5Only use the machine as it was intendedFundamentals Operating Instructions Starting the EngineEmergency Stop Auxiliary ControlsOperation from Platform Operating Instructions Operation from GroundTo Position Platform To SteerDriving on a slope run riseTo determine the slope grade Operating InstructionsDrive Enable Machine Not Level Indicator Light if equippedGenerator if equipped Drive Speed SelectAircraft Protection Package if equipped Check Engine Light if equippedAfter Each Use Operating InstructionsFree-wheelConfiguration for Winching Transport and Lifting InstructionsObserve and Obey Securing the Platform - Z-45/25 Securing to Truck or Trailer for TransitSecuring the Chassis Securing the Platform - Z-45/25JY Axis Lifting InstructionsX Axis Transport and Lifting InstructionsMaintenance Check the Engine Oil Level Maintenance Symbols LegendObserve and Obey Maintenance Check the Hydraulic Oil Level Maintenance Check the BatteriesCheck the Tire Pressure Maintenance Scheduled Maintenance Standard Base Models SpecificationsZ-45/25no jib Maximum slope rating, stowed position, 2WDStandard Base Models SpecificationsZ-45/25Jjib Maximum slope rating, stowed position, 2WDNarrow Base Models SpecificationsZ-45/25no jib Maximum slope rating, stowed positionNarrow Base Models SpecificationsZ-45/25Jjib Maximum slope rating, stowed positionFourth Edition · First Printing SpecificationsOperators Manual Part No.114339