Fourth Edition · First Printing | Operator's Manual |
|
|
|
|
Test Limited Drive Speed - Standard Base Models
36 Press down the foot switch.
37Raise the primary boom approximately 2 feet / 61 cm.
38Slowly move the drive control handle to the full drive position.
Result: The maximum achievable drive speed with the primary boom raised should not exceed 1 foot / 30 cm per second.
39Lower the primary boom to the stowed position.
40Raise the secondary boom approximately 2 feet / 61 cm.
41Slowly move the drive control handle to the full drive position.
Result: The maximum achievable drive speed with the secondary boom raised should not exceed 1 foot / 30 cm per second.
42Lower the secondary boom to the stowed position.
43Extend the primary boom approximately 1 foot / 30 cm.
44Slowly move the drive control handle to the full drive position.
Result: The maximum achievable drive speed with the primary boom extended should not exceed 1 foot / 30 cm per second.
45 Retract the boom to the stowed position.
If the drive speed with the primary boom raised, the secondary boom raised or the primary boom extended exceeds 1 foot / 30 cm per second, immediately tag and remove the machine from service.
Inspections
Test Limited Drive Speed - Narrow Base Models
36 Press down the foot switch.
37Raise the primary boom approximately 2 feet / 61 cm.
38Slowly move the drive control handle to the full drive position.
Result: The maximum achievable drive speed with the primary boom raised should not exceed 6 in / 15 cm per second.
39Lower the primary boom to the stowed position.
40Raise the secondary boom approximately 2 feet / 61 cm.
41Slowly move the drive control handle to the full drive position.
Result: The maximum achievable drive speed with the secondary boom raised should not exceed 6 in / 15 cm per second.
42Lower the secondary boom to the stowed position.
43Extend the primary boom approximately 1 foot / 30 cm.
44Slowly move the drive control handle to the full drive position.
Result: The maximum achievable drive speed with the primary boom extended should not exceed 6 in / 15 cm per second.
45 Retract the boom to the stowed position.
If the drive speed with the primary boom raised, the secondary boom raised or the primary boom extended exceeds 6 in / 15 cm per second, immediately tag and remove the machine from service.
Part No.114339 | 33 |
