Gigabyte manual GN-BR30N-RH 2.4GHz AirCruiser N300 Wireless Router, The LAN Ethernet Status Tab

GN-BR30N-RH 2.4GHz AirCruiser N300 Wireless Router

LAN Netmask 1 Displays the IP Subnet Mask being used by the Local (LAN) port of the router. Default is 255.255.255.0

LAN IP 2 Address Displays the alternate IP address being used by the Local (LAN) port of the Router

LAN Netmask 2 Displays the alternate IP Subnet Mask being used by the alternate Local (LAN) port of the router.

LAN DHCP Status Identifies if the Router’s built-in DHCP server is active for the LAN attached devices.

LAN DHCP Start IP The starting IP number in the range possible IP addresses issued by the DHCP server

LAN DHCP End IP The last IP number in the range possible IP addresses issued by the DHCP server

The LAN Ethernet Status Tab

On the LAN Ethernet Status the Router displays the Ethernet Status of the current LAN current connection.

MAC This field displays the MAC address of the portable AP as seen on your wireless network.

MTU This specifies the maximum size of the packet permitted for Internet transmission.

Rx packets The number of data packets received by the AP.

Tx packets The number of data packets transmitted by the AP.

Rx bytes The current bandwidth (receive) on the LAN port.

Rx bytes The current bandwidth (transmit on the LAN port.

The WAN Ethernet Status button

MAC The field displays the MAC address used by the WAN port of the AP.

13