Response :
•Check that the power cord is connected properly, and the router’s power LED is lit green.
•Verify that all the TCP/IP configuration settings are correct. (Problem 1 above)
•Check that your ADSL/Cable Modem is operating normally, and/or you have ISP service available.
•Check that all network cabling is properly connected.
Problem 3: | When I Configure WDS bridging, my |
| Access (WPA) security is cancelled. |
Response: | |
| System (WDS) cannot be used at the same time. |
| If you need to secure a WDS network, use the Wireless |
| Encryption Protocol (WEP) feature instead. |
| If you must use WPA, connect your base stations to a wired |
| local area network (LAN). |
67
