6.Orient the Left Spotter (24) as shown. Slide the Left Spotter and two Guide Bumpers (27) onto the left Guide Rod (5). Then, engage the Left Spotter onto the Left Upright (3).
Repeat this step with the Right Spotter (not shown) and the right Guide Rod (not shown).
7.Slide the Right Guide (19) and the Left Guide (20) onto the Guide Rods (5).
Slide the Weight Bar (17) through the Left Guide (20), the Locking Bar (18), and the Right Guide (19). Engage the Locking Bar onto the Uprights (3, 4).
8.Attach a Barbell Adapter (22) to one end of the Weight Bar (17) with an M10 x 25mm Button Screw (98), an M10 Split Washer (93), and an M10 Large Washer (76). Repeat this step on the other end of the Weight Bar.
Tighten an M8 x 20mm Hex Screw (21) into the Left Guide (20). Repeat this step with the Right
Guide (not shown).
6 |
|
|
|
|
|
| 27 |
|
|
| 24 |
|
|
| 27 |
|
|
| 5 |
|
|
| 3 |
7 |
|
| 5 |
|
|
| |
|
|
| 19 |
|
|
| 5 |
|
| 4 | 3 |
|
| 18 | |
|
|
| |
|
|
| 20 |
|
|
| 17 |
8 |
|
| 20 |
|
|
| |
| 21 |
| 17 |
|
|
| |
|
|
| 22 |
|
|
| 76 |
|
|
| 93 |
|
|
| 98 |
10
