47.Attach an Arm Pad (30) to the Right Arm (11) with two M6 x 77mm Screws (87) and two M6 Washers (86). Attach the other Arm Pad (30) to the Left Arm (10) in the same manner.
48.Slide two Weight Bumpers (37) onto the Left Support (6). Make sure that the flat edge of each Weight Bumper is facing the outside of the Left Support.
Slide two Weight Bumpers (37) onto the Right Support (not shown).
49.Set a Weight Rest (35) and a Safety Spotter (36) onto the Left Upright (3). Set the other Weight
Rest and the other Safety Spotter onto the Right Upright (not shown) at the same heights.
50.Attach two Small Foot Plates (50) to the Bench Stabilizer (108) with four M4 x 10mm Screws (95).
47 | 11 |
|
|
|
|
| |
87 | 86 |
| 10 |
|
| ||
|
| 30 | 30 |
|
|
| |
48 |
|
|
|
|
|
| 37 |
|
| 37 |
|
|
| 6 |
|
49 |
| 35 |
|
|
| 3 |
|
| 36 |
|
|
50 |
|
|
|
| 50 |
| 108 |
|
|
| |
| 95 |
| 50 |
|
|
| |
|
|
| 95 |
21
