Gold's Gym GGBE6974.1 manual

39. Route the Long Cable (54) over a 90mm Pulley	39
(58). Attach the Pulley, a Small Cable Trap (63),
and two Half Finger Guards (40) to the lower hole
of the “U”-bracket (47) with an M10 x 53mm	147
Button Bolt (147) and an M10 Nylon Locknut (79).
			47
Make sure that the Cable Trap is oriented to
hold the Cable in the groove of the Pulley.	40		40
				79
	63
		58
		54
40. Route the Long Cable (54) under a 90mm Pulley	40
(58). Attach the Pulley and two Half Finger
Guards (40) to the Center Base (2) with an M10 x
46mm Button Bolt (100) and an M10 Nylon	54		58
Locknut (79).
	100
	40
		2	40	79
41. Route the Long Cable (54) around a 110mm	41		102
Pulley (59). Attach the Pulley, a Long Cable Trap
			150
(62), an M10 Washer (84), and a Large Full
Finger Guard (150) to the Center Base (2) with			84
an M10 x 76mm Button Bolt (102) and an M10
			59
Nylon Locknut (79). Make sure that the Cable
Trap is oriented to hold the Cable in the			54
groove of the Pulley.			62
			2
			79
42. Route the Long Cable (54) under a 90mm Pulley	42
(58). Attach the Pulley and two Half Finger
Guards (40) to a Base (1) with an M10 x 46mm	54		58	79
Button Bolt (100) and an M10 Nylon Locknut (79).
	40	1		40
	100
	19