Gold's Gym GGBE6974.1 manual

Models: GGBE6974.1

1 40
Download 40 pages 12.95 Kb
Page 13
Image 13

15.Attach the Foot Plate (9) to the Center Base (2) and the Backrest Upright (8) with four M10 x 19mm Button Bolts (77) and four M10 Nylon Locknuts (79).

See steps 2–12. Tighten all of the bolts, screws, and nylon locknuts.

See steps 14–15. Tighten all of the bolts, screws, and nylon locknuts.

16.The following steps are shown from the rear of the weight rack. See the CABLE DIAGRAMS on pages 29 and 30 to identify cables as you assemble them.

Identify the Butterfly Cable (71). Attach the Cable to the Right Arm (11) with an M8 x 19mm Shoulder Bolt (85) and an M8 Nylon Locknut (78).

Do not overtighten the Nylon Locknut; the Cable must pivot easily.

17.Route the Butterfly Cable (71) over a “V”-pulley (60). Attach the “V”-pulley, a Large Cable Trap (61), an M10 Washer (84), and two Full Finger Guards (39) to the Backrest Upright (8) with an M10 x 62mm Button Bolt (88) and an M10 Nylon Locknut (79). Make sure that the Large Cable

Trap is oriented to hold the Cable in the groove of the “V”-pulley.

18.Route the Butterfly Cable (71) under a 90mm Pulley (58). Attach the Pulley and two Half Finger Guards (40) to the Double “U”-bracket (46) with an M10 x 46mm Button Bolt (100) and an M10 Nylon Locknut (79).

15

 

 

 

 

 

 

79

 

8

 

 

 

 

77

 

 

 

2

77

9

 

79

 

 

 

 

16

 

85

 

 

 

 

71

 

 

 

 

78

 

 

 

 

11

 

17

 

 

 

 

 

 

71

39

88

 

 

61

84

 

 

 

60

 

79

39

 

 

 

8

 

 

 

 

18

 

 

 

 

 

71

 

 

 

79

58

 

 

 

40

 

 

 

 

 

 

 

46

100

 

 

 

13

Page 13
Image 13
Gold's Gym GGBE6974.1 manual