Gold's Gym GGBE6974.1 manual Identify the Low Cable 72. Route the Cable

27. Identify the Low Cable (72). Route the Cable	27
through the Backrest Upright (8) and under a
110mm Pulley (59). Attach the Pulley inside the	8	79
Upright with an M10 x 93mm Button Bolt (97),		84
two M10 Washers (84), two 25mm Spacers (55),	72	55
and an M10 Nylon Locknut (79).		59
	84 55
	97
28. Route the Low Cable (72) over a 90mm Pulley	28
(58). Attach the Pulley and two Half Finger		79
Guards (40) to the Double “U”-bracket (46) with
	100
an M10 x 46mm Button Bolt (100) and an M10
Nylon Locknut (79).		40
	40	46
		58
		72

29. Route the Low Cable (72) under a 90mm Pulley	29
(58). Attach the Pulley and two Half Finger
			72
Guards (40) to the Center Base (2) with an M10 x
			100
46mm Button Bolt (100) and an M10 Nylon
Locknut (79).
		58	40
	40
	79	2
30. Wrap the Low Cable (72) over a 90mm Pulley	30
(58). Attach the Pulley, a Small Cable Trap (63),
and two Half Finger Guards (40) to the second
hole from the bottom of the two Pulley Plates (74)			79
with an M10 x 53mm Button Bolt (147) and an
M10 Nylon Locknut (79). Make sure that the		74	40
Cable Trap is oriented to hold the Cable in the
			74
groove of the Pulley.
		40	63
		147	58
			72

16