2.Insert two M10 x 65mm Carriage Bolts (83) up through the Center Base (2). Place a piece of tape over the bolt heads to hold them in place.
Attach a Base (1) to the Center Base (2) with two M10 x 93mm Button Bolts (97), an M10 Split Washer (93), two M10 Washers (84), and an M10 Nylon Locknut (79). Do not tighten the Button
Bolts yet.
Attach the other Base (not shown) to the Center Base (2) in the same manner.
3.Attach the Backrest Upright (8) to the Center Base (2) with the indicated two M10 x 65mm Carriage Bolts (83) and two M10 Nylon Locknuts (79). Do not tighten the Nylon Locknuts yet.
2 |
|
|
2 | 79 |
|
|
| |
|
| 93 |
83 |
|
|
| 1 | 84 |
| 97 | |
|
| |
3 |
|
|
8 
79
79
2
83
8
