Gold's Gym GGSY69320 manual

66. Wrap the Fly Cable (85) over a 90mm Pulley (78).	66
Attach the Pulley and a Cable Trap (68) between
			59
the lower set of holes in the “U”-bracket (59) with	87
an M10 x 50mm Bolt (100) and an M10 Nylon
	68		100
Locknut (87). Make sure that the Cable Trap is
turned to hold the Cable in the groove of the
Pulley.	85
			78
67. Wrap the Fly Cable (85) under a 90mm Pulley	67
(78). Attach the Pulley to the indicated bracket on
the Short Base (2) with an M10 x 45mm Bolt (93)
and an M10 Nylon Locknut (87).			78
			85
	2
	87		93
68. Remove the indicated 90mm Pulley (78) from the	68
Long Base (120). Wrap the Lat Cable (88) under
			88
the Pulley. Reattach the Pulley to the Base with
	87	78
the M10 x 95mm Bolt (92) and the M10 Nylon
Locknut (87).
			92
			120
69. Wrap the Fly Cable (85) over a 90mm Pulley (78).	69
Attach the Pulley and a Cable Trap (68) between
the second set of holes from the bottom of the
indicated pair of Pulley Plates (63) with an M10 x
50mm Bolt (100) and an M10 Nylon Locknut (87).			63	100
Make sure that the Cable Trap is turned to
hold the Cable in the groove of the Pulley.			87
				68
				85
			78
70. Attach the Fly Cable (85) inside the Long Base	70
(120) with an M10 x 65mm Bolt (18), two M10
	85		91 87
Washers (91), and an M10 Nylon Locknut (87).
	18	91
				120
	23