GoVideo DVR4500, DVD VCR Combo I E W E V E N T S U M M a R Y, M E R R E C O R D I N G Error S

...continued

SELECT EVENT [1-16] :01

1	10:30 PM	On Wednesdays
	Ch10	1H30M	Auto
2	- - : - - - -	- - -	- - - / - -
	Ch - -	- H - - M	- -
3	- - : - - - -	- - -	- - - / - -
	Ch - -	- H - - M	- -
4	- - : - - - -	- - -	- - - / - -
	Ch - -	- H - - M	- -
	/ To Move		To Select

1 0 V I E W E V E N T S U M M A R Y

Press SETUP/ENTER to confirm the event and view a summary of all programmed events.

•The event is now stored in memory and will record at the scheduled time. It is not necessary to turn the DVD+VCR off or put it into a “Timer” mode; the event will record regardless of the state of the DVD+VCR.

•The “Timer” indicator will light on the front panel display. If there is a timer recording error, the “Timer” indicator will blink and an error message will appear on the screen (see “Timer Re- cording Errors” at left).

•To program another event, select any available event number.

•To edit an event, select its event num- ber.

•To delete an event, use the UP/DOWN arrow keys to select it, then press

MENU/CLEAR.

•To exit the Select Event screen, press

SETUP/ENTER.

T I M E R R E C O R D I N G

T I M E R R E C O R D I N G E R R O R S

Ta p e M i s s i n g		O v e r l a p p i n g E v e n t s
Solution: Insert a tape in the VCR		Solution: If two programmed events
deck.		overlap, you will be prompted to
Ta p e M i s s i n g Ta b		either delete one of the events, or
Solution: Insert a tape with a record		allow them to overlap. If you allow
safety tab.		them to overlap, the event with the
N o t R e a d y		earliest starting time will be com-
		pletely recorded, then the remainder
Solution: The VCR deck is already in
		of the event with the next earliest
use. Press STOP	on this deck.
		starting time will be recorded.

N O T E

E R R O R S

•Complete Program Record (CPR) adjusts the record speed to make sure the tape does not run out before the Timer Recording is complete. With Record Speed set to “Auto,” the DVD+VCR will begin recording in SP. It will then calculate how much time is remaining on the tape and adjust the record speed to SLP if necessary. If there is not enough room to record the entire show, the DVD+VCR will record in SLP until the end of the tape is reached.

6 - Timer Recording

27