31
ToInstall Locking Clip: (DO NOT use with base)
1. Tighten the buckledbelt by pushing down
hard onthe infant restraint and pulling hard on
theshoulder belt.
2. Whilepushing down on infant restraint, pinch
thetwo straps together behind the buckle
tongue.Unbuckle the belt
withoutallowing it to slip.
3. Connectlap and shoulder belts
withlocking clip as shown
and .
4. Rebucklebelt. Check thatlap belt
doesnot move by pulling and
pushing hard oninfant restraint.
If belt loosensor lengthens,
repeatprocedure.
Lockingclip
Lockingclip goes here,
1/2inch(1 cm) from the buckle
•CombinationLap/Shoulder
Beltwith Sliding Latch
Plate
This belt has a latch platethat slides
freelyalong the belt.
This belt MUST be convertedto prevent
movementof the lap portion of the belt.
Youmust use a locking clip (provided
withthe infantrestraint) when using the
infantrestraint without the base unless
yourvehicle's seat belt can be
convertedin another way as described
in yourvehicle owner's manual.
1/2inch
(1 cm)