Grandstream Networks GXV300X Access the Web Configuration Pages, ∙Video Loopback ∙Audio Loopback

Reboot

Register Account

About

Exit

∙Keypad/LED Diagnostics All LEDs will light up

Press any key on the keypad, to display the button name in the LCD. Lift and put back the handset or press Menu button to exit the diagnostic mode.

∙LCD Diagnostics

∙Camera/LCD Test Pattern

∙Video Loopback

∙Audio Loopback

Speak into the handset. If you hear your voice in the handset, your audio works fine.

Press Menu button to exit the mode.

∙PSTN Loopback

∙Ethernet Loopback

Connect a cross Ethernet cable from your “PC” port, and the “LAN” port. The test result is displayed on the scr een. Use this feature to diagnose the state of health of the RJ45 jacks. Press Menu button to exit the diagnostic mode.

Note: Running the Ethernet Loopback mode with a normal con-

nection will cause IP loss.

Press ‘←’ to return to the main menu.

Press Menu button to reboot the device

Choose Account to force the phone sends out registration request

Exit from this menu.

CONFIGURATION WITH WEB BROWSER

The GXV300x embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to configure the IP Video phone through a Web browser such as Microsoft’s IE or Mo- zilla Firefox.

Access the Web Configuration Pages

The GXV IP Phone Web Configuration Pages URL: http://Phone-IP-Address where the Phone-IP- Address is the IP address of the phone displayed on the LCD screen.

To access the phone’s Web Configuration Menu

∙Connect the computer to the same network as the phone1

∙Make sure the phone is turned on and shows its IP-address

∙Start a Web-browser on your computer

∙Enter the phone’s IP-address in the address bar of the browser2

∙Enter the administrator’s password to access the Web Configuration Menu3

Grandstream Networks, Inc.	GXV300x User Manual	Page 22 of 54
	Firmware 1.2.3.7	Updated: 12/2010