Grandstream Networks GXV300X IP Address, Time Zone, Daylight Savings Time, Rule Syntax, Date

IP Address	The GXV300x operates in two modes:
		∙ DHCP mode: all the field values for the Static IP mode are not used (even though
			they are still saved in the Flash memory.) The GXV300x acquires its IP address
			from the first DHCP server it discovers on its LAN. The DHCP option is reserved for
			NAT router mode (currently NOT implemented).
		∙ To use the PPPoE feature, set the PPPoE account settings. The GXV300x estab-
			lishes a PPPoE session if any of the PPPoE fields is set.
		∙ Preferred DNS Server: If configured and enabled, all the DNS query will be sent to
			this server instead of other DNS servers from network.
		∙ Static IP mode: configure all of the following fields: IP address, Subnet Mask, De-
			fault Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary).
Time Zone	This parameter controls the date/time display according to the specified time zone.
	The “Allow DHCP Option 2 to override Time Zone setting” option allows DHCP server to
	override default NTP time server if user has own NTP server. Default is No.
Daylight Savings Time	This parameter controls time displayed in daylight savings time. If set to “Yes”, then the dis-
	played time will be 1 hour ahead of normal time.
	The “Optional Rule” is configured to automatically adjust the Daylight Savings Time (DST)
	based on the rule set in this field.
	Rule Syntax:
	•	start-time; end-time; saving
	•	Both start-time and end-time have the same syntax: month,day,weekday,hour,minutes
			o month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
			o day: [+-]1,2,3,..,31
			o weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight
			saving rule is not based on week days but based on the day of the month.
			o hour: hour (0-23), minute: minute (0-59)
	If “weekday” is 0, it means the date to start or end daylight saving is at exactly the given date.
	In that case, the “day” value must not be negative. If “weekday” is not zero and “day” is posi-
	tive, then the daylight saving starts on the first “day” the iteration of the weekday (e.g.: 1st
	Sunday, 3rd Tuesday etc). If “weekday” is not zero and “day” is negative, then the daylight
	saving starts on the last “day” the iteration of the weekday (e.g.: last Sunday, 3rd last Tues-
	day etc).
	The saving is in the unit of minutes. The saving time may also be preceded by a negative (-)
	sign if subtraction is desired instead of addition.
	The default value is set for US, the “Automatic Daylight Saving Time Rule” shall be set to
	“3,2,7,2,0;11,1,7,2,0;60”
	Examples
	US/Canada where daylight saving time is applicable:
	03,02,7,02,00;11,1,7,02,00;60
	This means the daylight saving time starts from the second Sunday of March at 2AM and
	ends the first Sunday of November at 2AM. The saving is 60 minutes.
Time Display Format	LCD time display in 12 hour or 24 hour format
Date Display Format	Choose one of the following formats:
		∙	Year-Month-Day
		∙	Month-Day-Year
		∙ Day-Month-Year
Display Clock instead of	Default is No. Display the clock instead of Date. If set to “Yes”, it will show the clock in the
Date	LCD instead of date.
Grandstream Networks, Inc.			GXV300x User Manual	Page 25 of 54
			Firmware 1.2.3.7	Updated: 12/2010