VIDEO SURVEILLANCE
To use the GXV300x as a video surveillance camera, please configure the GXV300x and the monitor PC in the same LAN environment. Advanced users may manipulate it to work over WAN (configuration not rec- ommended and not covered in this User Manual). For best results, Grandstream recommends using this feature in the same LAN environment or ensure both monitor PC and phone have static public IP ad- dress.
VIDEO SURVEILLANCE CONFIGURATION DIRECTIONS
Phone side: In the ADVANCED SETTING page, find the following field and change the default setting
from “NO” to “YES”: reboot the device.
PC side (Monitor Device):
1.Download VLC from http://www.videolan.org/vlc/ . This is the only free open source player that supports both the Grandstream device and RFC 3984.
2.Launch VLC.
3.Go to Tools
4.Go to Tools
5.Close the Preferences window and go to File
∙Select RTSP as the protocol
∙Enter the URL in the “Customize” field using the f ormat:
rtsp://admin:ADMIN_PASSWORD@DEVICE_IP_ADDRESS:DEVICE_RTSP_PORT.
∙Change the text in red to your own configuration parameter:
i.ADMIN_PASSWORD is the phone’s administrator password for WebUI.
ii.DEVICE_IP_ADDRESS is the phone’s IP.
iii.DEVICE_RTSP_PORT is the RTSP port setting of the device. If the phone is us- ing default value 554, omit the port portion from the URL
∙Click OK or enter Return key. Start viewing the video surveillance from the PC.
Limitations:
1.Video surveillance supports only two (2) concurrent viewers on the GXV. The video stream is set at 5 frame per second and 128kbps.
2.The video stream will stop if a call starts. The video stream server (the phone) will not actively terminate the session. Most clients (the VLC software in PC) will terminate the session after cer- tain interval of time. A restart of the VLC software is required to view the surveillance again.
Grandstream Networks, Inc. | GXV300x User Manual | Page 51 of 54 |
| Firmware 1.2.3.7 | Updated: 12/2010 |