| Use Random Port |
| This parameter, when set to “Yes”, will force random generation of both the local SIP and RTP |
| |||
|
|
| |||||
|
|
| ports. This is usually necessary when multiple GXV300xs are behind the same full cone NAT. De- |
| |||
|
|
| fault is No. (This parameter should be set to NO when using Direct |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| |||
|
| This parameter specifies how often the GXV300x sends a blank UDP packet to the SIP server in |
| ||||
| interval |
| order to keep the “pin hole” on the NAT router to open. Default is 20 seconds. |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Use NAT IP |
|
|
| |||
|
| NAT IP address used in SIP/SDP message. Default is blank. Use ONLY if ITSP requires. |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| STUN Server |
|
|
| |||
|
| IP address or Domain name of the STUN server. STUN resolution result will display in the STA- |
| ||||
|
|
| TUS page of the Web UI. Only |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Firmware Up- |
|
|
| |||
|
| This radio button will enable GXV300x to download firmware or configuration file through either |
| ||||
| grade and Provi- |
| HTTP or TFTP (local preferred) server. This is mutual exclusive choice. |
| |||
| sioning |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Via TFTP Server |
|
|
| |||
|
| This is the IP address of the configured TFTP server. If selected and it is |
| ||||
|
|
| GXV300x will attempt to retrieve a new configuration file or new firmware from the specified TFTP |
| |||
|
|
| server at boot time. It will make up to 3 attempts before timeout and then it will start the boot |
| |||
|
|
| process using the existing code image in the Flash memory. If a TFTP server is configured and a |
| |||
|
|
| new code image is retrieved, the new downloaded image will be verified and then saved into the |
| |||
|
|
| Flash. |
|
|
|
|
|
|
| Note: Grandstream strongly recommends that the user upgrade firmware locally in a LAN envi- |
| |||
|
|
| ronment if using TFTP to upgrade. Please do NOT interrupt the TFTP upgrade process (especial- |
| |||
|
|
| ly the power supply) as this might damage the device. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Via HTTP Server |
|
|
| |||
|
| The HTTP server URL used for firmware upgrade and configuration. For example, |
| ||||
|
|
| http://provisioning.mycompany.com:6688/Grandstream/1.2.2.5 | Here “:6688” is the specific TCP |
| ||
|
|
| port that the HTTP server is using; it can be omitted if using default port 80. Please do not interrupt |
| |||
|
|
| power when doing firmware upgrade. |
|
|
| |
|
|
| Note: If Auto Upgrade is set to No, GXV300x will only perform HTTP download once at boot up. |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Firmware |
|
|
| |||
|
| This is the server path for Firmware server. It can be different with the Configuration server which |
| ||||
| Server Path |
| used for provisioning |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Config |
|
|
| |||
|
| This is the server path for provisioning, it can be different with firmware server. |
| ||||
| Server Path |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Firmware File |
|
|
| |||
|
| For ITSP to lock up firmware. If configured, only firmware matched with the encrypted Prefix |
| ||||
| Prefix/Postfix |
| and/or Postfix will get download and flashed into the phone. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Config File |
|
|
| |||
|
| For ITSP to lock up configuration. If configured, only configuration file matched with the encrypted |
| ||||
| Prefix/Postfix |
| Prefix and/or Postfix will get download and flashed into the phone. |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Allow DHCP |
| Default is Yes. |
|
|
|
|
|
|
|
|
|
| ||
| Option 66 to |
| If DHCP option 66 turned ON in LAN, the TFTP server can be redirected. Please be very careful |
| |||
| override server |
| to this as the redirection could brick the phone if happed during firmware upgrade. |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Automatic |
|
|
| |||
|
| This function is used by ITSP. End user should NOT touch these parameters. |
| ||||
| Upgrade |
| Default is No. Choose “Yes” to enable automatic HTTP upgrade and provisioning. |
| |||
|
|
|
| ||||
|
|
| In “Check for upgrade every” field, enter the number of minutes to check the HTTP server for firm- |
| |||
|
|
| ware upgrade or configuration changes. When set to “No”, the phone will only perform HTTP up- |
| |||
|
|
| grade and configuration check once at boot up. |
|
|
| |
|
|
| Some other selections can be used to |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Grandstream Networks, Inc. | GXV300x User Manual | Page 29 of 54 |
| |||
|
|
|
| Firmware 1.2.3.7 | Updated: 12/2010 |
| |
