To set the 90˚ fence stop:
1.Loosen the set screw in the plunger lock collar, shown in Figure 63, and loosen the fence tilt lock.
2.Using a 90° square, adjust the fence to the 90° position, as shown in Figure 63.
Plunger |
Lock Collar |
Fence Tilt |
Scale |
Figure 63. Adjusting fence to 90˚.
3.Tighten the set screw in the plunger lock col- lar.
4.Adjust the indicator (if necessary) to 0° to calibrate the fence tilt scale.
To set the 45° outward fence stop:
1.Loosen the fence tilt lock, and position the fence against the 45° outward positive stop bolt.
2.Loosen the jam nut on the 45˚ outward fence positive stop bolt (Figure 64).
45° Outward
Positive Stop
Bolt
Figure 64. Adjusting fence 45˚ outward.
3. Adjust the 45˚ outward positive stop bolt until the fence is exactly 45° outward while rest- ing on the bolt (check the angle with a sliding bevel set to 135°).
4. Retighten the jam nut loosened in Step 2.
G0604 6" X 56" Jointer |