Grizzly G0636X owner manual Fence, To install the fence handle

Fence

To install the fence handle:

1.Thread the fence handle onto the fence, as shown in Figure 18, and tighten the hex nut against the fence pivot block to secure the handle.

Set

Screw

Pivot

Block

Hex

Nut

Rail

Figure 18. Fence handle installed.

2.Install the resaw fence lock handle (with the washer and moving plate) onto the fence, then slide the resaw fence over the moving plate as shown in Figure 19.

Note: Leave the moving plate and lock handle loose enough to slide on the resaw fence.

G0636X 17" Ultimate Bandsaw

Resaw Fence

Resaw Lock

Handle

Moving

Plate

Figure 19. Attaching resaw fence to standard

fence.

3.Tighten the resaw lock handle.

4.Pull the fence handle up and place the fence assembly on the rail, as shown in Figure 18.

5.Push the fence handle down to lock the fence assembly in place.

-19-