Grizzly G0755 owner manual Introduction, Machine Description Manual Accuracy, Contact Info

INTRODUCTION

Machine Description Manual Accuracy

The Model G0755 is a free-standing mill/drill that strikes a great balance between being heavy-duty and high-precision.

The spindle is equipped with precision P5 spindle bearings and is driven by an oil-bath-lubricated and gear-driven headstock. The spindle is fully reversible and features both coarse and fine downfeed controls. The six spindle speeds range from 90–1970 RPM and are controlled by conve- nient gear-change levers.

The headstock tilts 90° left/right and moves in the Z-axis along precision dovetailed ways—with both manual and powered elevation control. The table also features both manual and powered X-axis control, but with a manually-controlled Y-axis. All table movement is along scraped dovetail ways.

Contact Info

We stand behind our machines. If you have any questions or need help, use the information below to contact us. Before contacting, please get the serial number and manufacture date of your machine. This will help us help you faster.

Grizzly Technical Support 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663

Email: techsupport@grizzly.com

We want your feedback on this manual. What did you like about it? Where could it be improved? Please take a few minutes to give us feedback.

Grizzly Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: manuals@grizzly.com

-2-

We are proud to provide a high-quality owner’s manual with your new machine!

We made every effort to be exact with the instruc- tions, specifications, drawings, and photographs contained inside. sometimes we make mistakes, but our policy of continuous improvement also means that sometimes the machine you receive will be slightly different than what is shown in the manual.

if you find this to be the case, and the difference between the manual and machine leaves you confused about a procedure, check our website for an updated version. We post current manuals and manual updates for free on our website at www.grizzly.com.

Alternatively, you can call our technical support for help. Before calling, please write down the Manufacture Date and Serial Number stamped into the machine id label (see below). this infor- mation helps us determine if updated documenta- tion is available for your machine.

Manufacture date

serial number

Model G0755 (Mfg. Since 1/13)