Assemble the Crossbrace to the Hopper

3. ASSEMBLE THE CROSSBRACE TO THE HOPPER

A.Feed the multi-conductor cord through the collector ring shield, lower tube assembly, and drilled hole in hopper side.

B.Bolt the collector ring shield to the crossbrace assembly using sixteen (16) 1/4"-20 x 1" hex bolts, flat washers, lock washers, and hex nuts.

C.Slide the lower tube assembly into the shield assembly.

crossbrace assembly

1/4"-20 x 1" hex bolt

flat washer

collector ring shield

lock washer

hex nut

lower tube assembly

multi-conductor cord

hopper

PNEG-970S2 Hopper w/ Collector Ring