Wire the Collector Ring to the Sweep

3. WIRE THE COLLECTOR RING TO THE SWEEP

A.Attach one(1) 1" liquid-tight flex conduit coupling to each end of the 1" x 48" liquid-tight flex conduit.

B.Feed the nine (9) stranded wires from the collector ring through the 1" conduit coupling and 1" x 48" liquid-tight flex conduit assembly.

C.Attach the 1" x 48" liquid-tight flex conduit assembly to the pivot tube using the 1" conduit coupling.

1" flex conduit coupling

pivot tube

1" conduit coupling

1" x 48" flex conduit

D.Feed the nine (9) stranded wires from the collector ring through one of the holes in the right junction box.

E.Connect the 1" x 48" liquid-tight flex conduit assembly to the junction box using the 1" liquid- tight flex conduit coupling.

PNEG-970S2 Hopper w/ Collector Ring