GSI Outdoors PNEG-970 operation manual Assemble the Crossbrace to the Hopper

Assembly

3. ASSEMBLE THE CROSSBRACE TO THE HOPPER (cont.)

D.Making sure the lower tube assembly and drilled hole are aligned, bolt the crossbrace to the hopper using eight (8) 1/2"-13 x 1 3/4" hex bolts, flat washers, lock washers, and hex nuts.

crossbrace assembly

hopper

hex nut

lock washer

1/2"-13 x 1 3/4" hex bolt

E.Attach the 1" liquid-tight flex conduit coupling on the conduit assembly to the hopper.

F.Slide the lower tube weldment against the hopper and tack weld into position.

22 PNEG-970S2 Hopper w/ Collector Ring