Start-Up

1. Preform Pre-Start Checks

Warning! To ensure that the drive is not unexpectedly started, turn off and lock out or tag out the power source before proceeding. Failure to observe these precautions could result in bodily injury.

Danger! Failure to perform any or all of these pre-start checks may cause damage to the equipment and/or cause SERIOUS INJURY or DEATH to those in the work area.

Failure to perform any or all of these pre-start checks may also be a misuse of the equipment. Any misuse of the equipment may void the warranty.

A. Make sure ALL shields are in place.

ALWAYS keep ALL guards and shields in place, until all the power is disconnected and locked out.

B.Inspect the collector ring for any problems or potential problems.

C.Be aware of any emergency shutdown procedures. Two (2) people must always be in a position where the operation of the equipment can be monitored.

D.Before starting the auger for the first time, make sure that all parts are assembled correctly according to the instructions in this manual.

Make certain ONLY trained operators are in the work area before operating or moving the machine. Two (2) people must always be in a position where the operation of the equipment can be monitored.

PNEG-970S2 Hopper w/ Collector Ring

27

Page 27
Image 27
GSI Outdoors PNEG-970 operation manual Start-Up, Preform Pre-Start Checks