GTO RB923 rev installation manual Mounting the Control Box

Step 15:

Close the gate. Position the closed position stop plate on the end of the gate frame at mid-height. Extend the stop plate to make contact with the fence post at that position.

Install the closed position stop plate using appropriate hardware for the type of gate (U-bolts for tube or chain link gate, wood or lag screws for wood gates, etc.). This hardware is not provided.

Reattach the operator to the gate bracket.

Mounting the Control Box

Step 16:

Mount the control box using the nylon cable ties

(provided) or another secure mounting method. The control box must be mounted at least 3 feet above the ground to protect it from rain splash, snow, etc., and at least 3 feet from an ac power source to prevent electrical interference.

Hinge point

Closed Position

Stop Plate

The gate must open no more than 110°

Wood, metal or concrete post set in concrete.

Open Position Stop

SIDE VIEW	Closed Position Stop Plate mounted
	on metal post with u-bolts.
Gate Post	Fence Post
	TOP VIEW

17