3. “Teach” the New Code to Control Board | |
| Memory |
A. | Turn control box power switch OFF. |
B. | Unscrew and remove the control box cover. |
C. | Press and hold the LEARN button on the control board, and |
| turn the power switch ON. Release LEARN button. Wait 15 |
| seconds for the receiver to charge. |
STATUS
STATUS LED
AUTOCLOSE
60
OFF120
INERTIA
MIN MAX
OBSTRUCT
SENS.
D. | Press and hold transmitter button until the red STATUS LED |
| comes ON. |
E. | Release transmitter button. The new code is stored in control |
| board memory. |
PULL/PUSH |
| 4 |
|
|
|
|
|
| |
SNGL/DUAL |
| 3 | MIN | MAX |
SEQ1 |
| 2 |
|
|
SEQ2 | ON | 1 | LEARN | |
|
|
| ||
R | B | G |
| RCVR | |
Mounting the Receiver
Use the transmitter to check the range of the receiver before permanently mounting it.
Consider the following when mounting the receiver:
• Receiver cable length is 10 feet (receivers with a longer cable are available as special order items; call the GTO Sales Department). NEVER splice receiver cable!
• Run the cable through PVC conduit to protect it from damage.
• DO NOT run cable through metal conduit because the receiver signal range will be decreased.
• DO NOT run cable in conduit containing ac wiring.
• DO NOT mount receiver on a metal fence or post; doing so will decrease signal range.
• DO NOT overtighten the mounting screws; the receiver housing could be warped and the weather seal damaged.
•The receiver range can vary from 50 to 100 feet depending upon weather, topography, and external interference.
FCC Regulation
This device complies with FCC rules Part 15. Operation is subject to the following conditions:
1.This device may not cause harmful interference.
2.This device must accept an interference that may cause undesired operation.
Transmitter distance may vary due to circumstances beyond our control. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
25
