Haier AB212BCBAA, 0010571570 manual Sleep operation

Operation instruction

Sleep operation

Before going to bed, you can press the SLEEP button, the air conditioner will operate in comfort sleep mode to make you have a sound sleep.

Before using this function, you should calibrate the clock first, otherwise, the SLEEP function will be out of order.

Use of SLEEP function

After turning on the unit, setting the working mode, then press SLEEP button to make the air conditioner have the previous Sleep time (powered on for the first time or after performing Sleep is 1h). The Sleep symbol will appear. Press time */* button, you can choose between 1~8h. Each press, it may increase/decrease 1h and will display in the humidity area with “xh”, and display “Timer Off” in Timer Off area and the time to turn off; press Sleep button again to cancel Sleep function. The Sleep symbol disappears.

Operation modes

1.In COOLING, DEHUMIDIFYING operation

1 hour later in SLEEP operation, the temperature will increase 1* from the set temperature, another 1 hour later increase another 1*, then the unit will operate continuous for 6 hours, then it turns off automatically. The temperature is higher than set temperature to prevent you from getting a cold.

SLEEP operation starts		SLEEP operation stops
	about 6 hours
1 hour	increase 1*
1 hour	increase 1*
Set temperature		turn off
in COOLING* DEHUMIDIFYING operation

2.In HEATING operation	Set temperature				turn off
1 hour later in SLEEP operation, the temperature
	1 hour	decrease 2*
will decrease 2* from the set temperature, another		1 hour
1 hour later increase another 2*, then the unit will		decrease 2*	about 3 hours
operate continuous at this temperature for 3 hours,		3 hours	increase 1*
then it increases 1*, after operating at this	SLEEP operation starts		SLEEP operation stops
		in HEATING operation
temperature for another 3 hours, the unit will turn
off automatically. The temperature is lower than set
temperature to prevent you from feeling
uncomfortable during sleep.			**	**	**
3.In AUTO operation			**

The air conditioner will perform the relative SLEEP		**		**
	**	**		**
operation according to automatically chosen operation		**	****	**
mode.
4.In FAN operation		**/**
Cannot use SLEEP function

Note:

•After setting Sleep function, it is not permitted to adjust clock.

•The Sleep time is less than 8h, after reaching the set time, the unit will automatically stop. •Set Sleep function after setting “Timer Off” function, the air conditioner will perform

Sleep function.

•After setting Sleep function, the Timer function cannot be set.

•Set Sleep function after setting “Timer On” function, the Sleep function can only be set in the set time of Timer On.

10