Haier 0010571570, AB212BCBAA manual Operation points

Operation points

Operation of air conditioner

When the ambient humidity is too high, in COOLING or DEHUMIDIFYING mode, there may be water dropped

in the air outlet.

3-minute protection function

If start the unit immediately only after it is turned off, the compressor will start after 3 minutes have elapsed to protect the compressor.

Change of fan speed

In COOLING mode, the air sending is set at AUTO, when the indoor temperature is near the set temperature,

the fan speed will lower automatically. In HEATING mode, when room temperature reaches the set temperature, the compressor will stop running, and the fan will change to LOW FAN or stop.

In DEHUMIDIFYING mode, the fan speed will change automatically.

Far distance monitoring

There is a pre-set far distance control communication interface on the control panel of indoor unit. After installing the peripheral equipment according to the manual attached with the Haier made far distance control detector, the computer management or other place monitoring can be achieved to the air conditioner.

1